TEXTURED PROTECTIVE, DECORATIVE, ANTI-CARBONATION ACRYLIC SCREED FOR EXTERIOR / INTERIOR SURFACES
1. Gives a textured finish
2. Anti-carbonation properties
3. Good weathering properties
4. Excellent bond.
5. Forms tough acrylic plaster
6. Allows substrate to breathe
7. Choice of colours
8. Single pack, Trowel applied
9. Non toxic/Non flammable
10. Excellent waterproof coating
FAIRCOAT SCREED is ready to use acrylic based screed containing special polymers and fillers. It is a textured protective, decorative anti-carbonation screed for interior and exterior surfaces with exceptional weathering characteristics.
FAIRCOAT SCREED is used to provide a textured decorative durable coating for concrete and masonry surfaces. One coat application is recommended with a thickness of 1.5 to 2 mm.
Surface Preparation :
Substrates must be clean, sound and free from dust and loose particles. All holes and cracks must be filled with a suitable filler. All traces of oil, grease or other contaminations must be removed. The new concrete surfaces must be atleast 14 days old before coating. If in doubt, allow full curing to take place for 28 days before application of FAIRCOAT SCREED.
On old or porous surfaces, ensure that the substrate is sound and free from any loose particles. Apply FAIRCRETE SBL, apply FAIRCOAT SCREED on the primed surface.
Stir the material in the container thoroughly and spread evenly with trowel. Avoid application during rainy weather. The surface texture and porosity must be taken into account while estimating quantities.
Tools should be cleaned immediately after use with water.